Roland JEWELA - JWX10 a complete 4 axis desktop jewellery milling machine

Roland DG have created an advanced milling and engraving solution which streamlines the wax prototype production for the jewellery manufacturer or custom retailer. From the request of many designers and scupltuing crafts persons, the new JWX-10 was designed from the ground up as an affordable and versatile 4 axis wax milling machine. Using your own 3D computer aided designs, the JWX-10 allows you to automatically cut your wax prototypes and models with high speed and ulitimate repeatable precision. Being a digital process you can adjust size and design modifications precisely and speedily. JWX-10 with its included machining software, automates the portion of the prototype production which has so far required extensive labour and cost. Designed to sit adjacent to your working enviroment, the JWX-10 is ready to answer to you instant designs requirements and will save your production costs. An ideal and popular solution is Rhino with Techgems NOW! £ 4,995.00 + Delivery + VAT. Call us for a demonstration.   Roland JWX-10 (Jewela)     Note Computer not included Patrick Thorn works for Roland Direct With the JWX-10, the new streamlined cutting process is born! Designs in 3D CAD With the 3D computer aided design software you are in full control of your creations, plus it allows you to make effective and professional presentations to your customer. Automatic high-speed wax cutting! JWX-10 makes for fast accurate processing with the ability to reproduce fine detail that would normally take a long time by traditional methods. Wax model complete You computer has all your design and cutting data at hand for any design corrections and size modifications you customer requires. Size modifications Design corrections Its nearly there ! Using your skills and processes, the wax part can now be checked and finished, then off you go and produce the real thing. The speed of processing the JWX-10 gives you will shorten your production time and increase your profits. Plus the time you save will allow you to be more creative. The finished part !   Come for a Demonstration - Call 01784 466474 JWX-10 offers versatility as well and precision and speed With simple setting the rotary controlled axis lets you make cylindrical based parts upto 85mm diameter by 50mm long, plus it can be manually inclined in 15 degree increments from 0 to 90. Whilst the rotary axis is installed you can also use the included 65mm*65mm XY table, which increases your production capacity of three-dimensional sculptured accessories such as broach and the pendant tops. You can easily remove the rotary unit then you have a 140mm x 105mm working area to make larger 3D parts. High accuracy cutting head with the powerful 100W brushless motor facilitates fast cutting with 6000 to 20000 rpm In addition to the included sculpting cutting blade, other end mill cutters can be utilised when the optional ZC-23 collet set is purchased in addition to the machine. ZC-23 collet set contains 6mm, 5mm, 4mm, 3mm split collets.

Main specification

Processed possible material Resin such as chemical wood and modeling wax (as for metal outside object) XYZ operational stroke When rotary axis unit is not installed: 140 (X) x 105 (Y) x 105 (Z) mm When rotary axis unit is installed: 140 (X) x 70.9 (Y) x 60 (Z) mm Largest angle of rotation ±18*105° (+/- 5000 revolutions) From spindle point Distance to work When the work plate (large) you used,: Maximum of 126 mm When the work plate (small) you used,: Maximum of 40.5 mm Size of work Work plate (large): 140 (width) x 105 (depth) mm Work plate (small): 65 (width) x 65 (depth) mm In axis of rotation unit Installation possible material size Diameter: Maximum of 85 mm Length: 5 - 50 mm Inside diameter: 15 - 23 mm Installation possible material weight Processing which use the axis of rotation: 0.5 kg (largest moment of inertia 6*10 -4 kgm 2 When the work plate (large) is used,: 4 kg When the work plate (small) is used,: 0.7 kg XYZ axial drive system Stepping motor Operational speed XY axis: 0.1 - 50 mm/sec. Z axis: 0.1 - 30 mm/sec. A axis: 0.02 - 11.79 rpm Software resolution 0.01 mm/step Mechanical resolution XYZ axis: 0.002 mm/step A axis: 0.0225° Axis of rotation clamp system Ring processing jig with conical clamping ends Axis of rotation unit inclined angle 0 to 90° (in 15° steps, set manually befor cutting) Spindle motor 100 W DC brush less motor Spindle rpm 6000 - 20000 rpm Tool chuck Cutter holder (4.36 mm) / collet system (Optional collet set available ZC-23: 6, 5, 4, 3mm) Interface USB connector, sensor connector, axis of rotation unit connector and extended terminal Power source Voltage and frequency AC 100 to 240 V ±10 %, 50/60 Hz Necessary power source capacity 2.1 A Electric power consumption Approximately 210 W Operational sound When operating (at the time of not cutting material): 60 dB (A) below, When waiting: 40 dB (A) below (it depends on the ISO7779) External size 440 (width) x 517 (depth) x 554 (height) mm Weight 40 kg Outside packing sun/size 620 (width) x 710 (depth) x 755 (height) mm Packing weight 50 kg Operating temperature 5 to 40 deg C Operational humidity 30 - 80% (without having dew condensation) Accessory UK Power cord, power supply, collet, cutter (ZEC-A4025), sensor cable, chuck knob, work plate (small), work plate (large), attaching screws with hexagonal wrench, spanner and Roland Software Package CD-ROM, MODELA Player 4 CD-ROM, user's manual, Roland Software Package installation guide and MODELA Player 4 installation guide. Computer requirements Operating system Windows XP (Pro or Home edition) /Windows 2000 CPU Pentium 4 or equivilent recommended with CD ROM & spare USB Port (Not Hub) Memory (RAM) Recommendation of 1 GB ( although 512Mb will work OK) Necessary hard disk capacity for installation. Recommendation of 300 MB for all Roland included software

Note user requires 3D CAD software that can produce a 3D IGES(Mesh), STL or DXF formated design files, MODELA Player 4 can read this data and process the design for cutting on the Roland machine.

email us ! or call 01784 466 474 (UK)

home | digitising machines | milling machines | inkjets & vinyl | software | support & services | downloads | email | phone

© 1998-2006 Patrick Thorn & Co. All rights reserved.
All mentioned trademarks or logo's are acknowledge to their respective owners. E&OE